Installing architrave around doors is an inexpensive way to give your room a polished and elegant finish. It is an essential part of interior decoration that hides the rough edges between the wall and door frame. If you’re planning a renovation or simply giving your house a facelift, then adding door frame architrave is a great DIY project. Don’t know where to start? No worries, we’ve got you covered! In this article, we’ll give you a step-by-step guide to installing door architraves.
Step 1: Measure your door frame
Before starting, you’ll need to measure your door frame to buy the correct size of architrave. You’ll need to measure the top, sides, and bottom of your door frame. It’s important to get accurate measurements. You can use a measuring tape for this purpose.
Step 2: Choose your architrave
Once you have measured, the next step is to choose the architrave you want to use. There are various types of architrave available such as ogee, bullnose, chamfered, etc. Choose the one that matches your interior design and style.
Step 3: Cut the architrave
Using a miter saw, cut the architrave at a 45-degree angle, making sure it is long enough to fit the edge of the door frame. Cut one end of the architrave for the top, two for the sides, and two for the bottom. Remember, it’s better to cut it too long than too short as you can trim it later if necessary.
Step 4: Attach the architrave
Once your architrave pieces have been cut, place them on the door frame to make sure they fit correctly. After ensuring the pieces are correct, apply some adhesive to the back of the architrave and place it onto the frame, starting with the sides. Then, attach the top and bottom architrave pieces using the same process. Make sure to apply some pressure to ensure the adhesive sticks.
Step 5: Sand and paint
After the adhesive has dried, use sandpaper to smoothen out any rough edges and to make it flush with the wall. This will give it a professional finish. You can then paint the architrave to match your interior, or you can stain it to add a unique and stylish touch.
Conclusion:
With just a little bit of time and effort, you can easily install door frame architrave. It’s an affordable way to make a huge difference in the look and feel of any room. We hope our step-by-step guide has been helpful, and you’re now ready to take on your DIY project with confidence. Remember to choose the right architrave, measure correctly, cut precisely, attach securely, and finish to perfection. With these tips in mind, there’s no doubt that you’ll have beautiful architrave installed in no time!