Drywall is a common interior wall material in American homes and, as any homeowner who has ever painted knows, it can have some tricky issues. Nail pops, dents, cracks and other defects in drywall can detract from your wall’s beauty and may require some minor repair before repainting. Luckily, many of these problems can be resolved using proven methods by Grey County Drywall Contractors. This article outlines some of the most common drywall problems, their causes and how to fix them.
Cracks in drywall are common and often caused by a number of different things, including misaligned framing and improper drywall installation, large temperature fluctuations and simply gravity. Fortunately, for hairline cracks that aren’t indicative of more serious structural damage, a simple application of joint compound (also known as “mud”) can fill the gap and repair it. To do this, clean out the crack, then apply a thin layer of mud to it, using a putty knife to feather it out to the surrounding surface. Once the crack has been filled and smoothed, allow it to dry completely and sand it until it’s even with the rest of the surface.
Another common drywall issue is scuffing, which can occur from normal wear and tear. Hanging pictures, mirrors or cabinets can leave a dent or hole in your drywall, and children’s play can cause scuff marks as well. This type of damage is typically not a major problem and can be repaired with drywall putty or spackle, but can detract from the overall appearance of your walls.
If you have a large hole or crack in your drywall that isn’t easy to patch, putting in new drywall may be the best solution. Depending on the extent of the damage, you may need to cut out the damaged section and replace it with new drywall that’s been properly hung and screwed into place. This is generally a job that requires the expertise of a professional, but can be an effective way to restore your walls to their original condition.
Nail pops are little bumps that appear in drywall and can be caused by nails or screws that start to push through the surface. The good news is that they’re pretty simple to fix. Hammer out the nail or screw, then slather on some joint compound and smooth it with a putty knife. Once the compound has dried, sand it until it’s smooth and ready for paint.
There are a few different types of drywall available for use in residential spaces, including regular, fire-rated and moisture resistant varieties. The most commonly used thickness type is 1/2 inch, which works well in most rooms and hallways. However, it’s important to consider your building codes and specific space requirements before determining which type of drywall to install. For example, if you have an attic with high ceilings, you may want to consider installing a heavier 5/8 inch drywall to prevent damage from the weight of hanging fixtures.
Grey County Drywall
greycountydrywall.ca
info@greycountydrywall.ca
(647) 625-2013